中国激光, 2002, 29 (11): 1045, 网络出版: 2006-08-08   

工艺参数对激光快速成型316L不锈钢组织性能的影响

Influence of Processing Parameter on the Microstructure and Properties of the 316L SS Fabricated by Laser Direct Deposition
作者单位
北京有色金属研究总院,北京,100088
摘要
采用激光快速成型技术制备了316L不锈钢零件,研究了激光功率对激光快速成型不锈钢零件组织、性能的影响.研究结果表明,激光功率≤900 W条件下,所成型的不锈钢薄壁墙的组织为枝晶组织,当激光功率升高到1150 W时,枝晶组织变得更短.机械性能测试结果显示,在各激光功率下制备的不锈钢薄壁墙的机械性能均可满足实际使用要求.
Abstract
This paper is focused on the research of the 316 L stainless steel prepared by laser direct deposition, especially on the influence of laser power on the microstructure and properties of the parts by laser direct deposition. The results show that the obtained microstructure of the thin wall of stainless steel is composed of dendrites with the condition of the laser power less than 900 W, however, when the laser power reached to 1150 W, the dendrites become shorter. The mechanical property testing indicates that the as-formed 316L stainless steel under different laser power can meet the need to actual utility.

席明哲, 张永忠, 章萍芝, 石力开, 程晶. 工艺参数对激光快速成型316L不锈钢组织性能的影响[J]. 中国激光, 2002, 29(11): 1045. 席明哲, 张永忠, 章萍芝, 石力开, 程晶. Influence of Processing Parameter on the Microstructure and Properties of the 316L SS Fabricated by Laser Direct Deposition[J]. Chinese Journal of Lasers, 2002, 29(11): 1045.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!