中国激光, 2002, 29 (11): 1049, 网络出版: 2006-08-08
激光弯曲成形Ti-7Al-2Zr-2Mo-2V的组织及性能研究
Investigation on Microstructure and Property of Laser Bent
激光弯曲成形 累积线能量密度 显微组织 维氏硬度 门槛值 laser bending AED (accumulated energy density) microstructure Hv hardness critical value
摘要
采用大功率CO2快轴流激光器进行了Ti-7Al-2Zr-2Mo-2V的激光弯曲成形,研究了累积线能量密度对钛合金显微组织和维氏硬度的影响.提出了累积能量密度门槛值的概念,累积线能量密度高于门槛值时,累积线能量密度对钛合金显微组织和显微硬度有影响,低于门槛值时没有影响.随着累积线能量密度的增加,HAZ尺寸呈二次曲线增加.
Abstract
This paper investigates laser forming of Ti-7Al-2Zr-2Mo-2V with a 2000 W fast-axial flow CO2 laser unit. The study has been on the influence of accumulated energy density (AED) on the microstructure and Hvs hardness of laser bent Ti-7Al-2Zr-2Mo-2V. The paper presents a concept of critical value on AED. Microscopy observations have revealed that there are no effect on the microstructure of Ti-7Al-2Zr-2Mo-2V with the AED values less than 40 J/mm2, but the effects occur with the AED values higher than the critical value. With the increasing of AED the HAZ size grows in quadratic function.
刘顺洪, 胡乾午, 周龙早, 李志远, 胡席远. 激光弯曲成形Ti-7Al-2Zr-2Mo-2V的组织及性能研究[J]. 中国激光, 2002, 29(11): 1049. 刘顺洪, 胡乾午, 周龙早, 李志远, 胡席远. Investigation on Microstructure and Property of Laser Bent[J]. Chinese Journal of Lasers, 2002, 29(11): 1049.