中国激光, 2001, 28 (11): 1037, 网络出版: 2006-08-10   

激光切割中入射角对切割质量的影响

Effect of Laser Beam Incident Angle on Laser Cutting Quality
作者单位
国家产学研激光技术中心北京工业大学激光工程研究院,北京 100022
摘要
研究了激光入射角对薄板切割质量的影响,结果表明,在一定条件下,激光束不垂直工件表面时,仍可以获得切缝细、挂渣少的切割效果.同时切割头的运动方向在激光束不垂直于被加工表面时,对切割质量也有显著影响.给出了在三维激光切割时,由于干涉等原因无法保证激光束垂直入射时,为得到好的切割质量应采取的措施.
Abstract
In this paper author describes the result of an experiment which illustrates the effect of laser beam incident angle on laser cutting quality. The experiemnt shows the possibility to get a satisfying cutting quality with the non vertical laser beam to work piece surface. This is quite different from the traditional ideas which the laser beam must be vertical to work piece surface for laser cutting. In three dimensional laser cutting author gives the way to obtain good cutting quality when the laser beam is not vertical to work piece surface.

陈继民, 左铁钏. 激光切割中入射角对切割质量的影响[J]. 中国激光, 2001, 28(11): 1037. 陈继民, 左铁钏. Effect of Laser Beam Incident Angle on Laser Cutting Quality[J]. Chinese Journal of Lasers, 2001, 28(11): 1037.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!