强激光与粒子束, 2001, 13 (3): 303, 网络出版: 2006-05-15
铜蒸气激光器计算机辅助设计
Computer aided design of copper vapor laser
铜蒸气激光器 动力学模型 电子温度 计算机辅助设计 激活体积 copper vapor laser kinetic model electron temperature computer aided design lasing volume
摘要
在已有的各种输出功率、激励条件参数和实际模拟程序基础上,对铜蒸气激光器计算机辅助设计进行改进,获得了适合于宽广参数条件下的模拟程序及实用曲线组。可在一定的激光输出功率条件下确定器件的激活体积;当口径选定后,可得铜蒸气激光器对应的电功率输入密度、激励电场、最佳重复频率和放电管壁温度值。
Abstract
On the base of physical simulation codes whose different output power and stimulating conditions coincided to the experiments,the codes for large and small bore copper vapor laser(CVL) were improved and could be used to a series of physical parameters with their figures.If a certain output power of CVL were needed,the lasing volume would be decided.After that if the diameter was given the input power density,the stimulating electric field,the frequency determined by the metastable copper and the wall temperature that decides the copper vapor pressure were decided.
于德利, 王润文, 陶永祥. 铜蒸气激光器计算机辅助设计[J]. 强激光与粒子束, 2001, 13(3): 303. 于德利, 王润文, 陶永祥. Computer aided design of copper vapor laser[J]. High Power Laser and Particle Beams, 2001, 13(3): 303.