光学与光电技术, 2005, 3 (6): 51, 网络出版: 2006-06-12  

用于温差发生器的高精度温度测量与控制系统设计

Design of High Precision Temperature Measurement and Control for Temperature Difference Generator
作者单位
1 华中科技大学光电子工程系,武汉,430074
2 华中光电技术研究所,武汉,430073
摘要
讨论了用于温差发生器的高精度温度测量与控制的设计与实现.采用PT100铂电阻作为温度传感器,详细推导了非平衡电桥测量非线性的校正公式,采用24位的∑-△型的模数转换器AD7714保证了0.005℃的温度测量分辨率.控温电路采用线性化电流方式,算法上对积分分离PID算法做出改良,并与不完全微分PID算法结合形成一种优化PID算法,能快速、精确的把温差稳定到目标值,控温精度达到0.01℃.
Abstract
A method of high precision temperature measurement and control is introduced.PT100 is used as temperature measurement sensor.Nonlinear revised expressions of imbalance bridge circuit is calculated.0.005℃ can be distinguished exactly by using 24bit Σ-Δ A/D transformer AD7714.A new PID algorithm which combines improved discretely integral PID and inadequacy differential PID,makes the system stabilitate faster and exacter.The precision of the temperature is less than 0.01℃

黄晶, 曾延安, 肖恒兵, 侯绿, 常大定, 甘文斌. 用于温差发生器的高精度温度测量与控制系统设计[J]. 光学与光电技术, 2005, 3(6): 51. 黄晶, 曾延安, 肖恒兵, 侯绿, 常大定, 甘文斌. Design of High Precision Temperature Measurement and Control for Temperature Difference Generator[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2005, 3(6): 51.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!