光学学报, 1998, 18 (10): 1422, 网络出版: 2006-10-18
百瓦级铜蒸汽激光器的热设计
Thernal Design of a 100 W Copper Vapor Laser
摘要
通过对百瓦级铜蒸汽激光器放电管内气体温度的分析计算,给出了百瓦级器件为防止“黑心”现象输入功率密度的最佳值。分析计算了在此输入功率密度下,为达到最佳工作温度所需的保温层厚度,理论计算和实验结果吻合较好。从而建立了一套确定放电管内气体温度、保温层厚度的方法。
Abstract
The optimum input power density is presented by analyzing and calculating the discharge tube gas temperature of a 100 W copper vapor laser to avoid the “black center of beam”. The optimum thickness of alumina fiber can be determined by analyzing and calculating the coaxial heat conductivity loss. The theoretical calculation is verified well with the experimental data. Therefore, the method of determining the gas temperature in discharge tube and the thickness of alumina fiber is built up.
陈林, 陶永祥, 尹宪华, 杨燕, 王润文. 百瓦级铜蒸汽激光器的热设计[J]. 光学学报, 1998, 18(10): 1422. 陈林, 陶永祥, 尹宪华, 杨燕, 王润文. Thernal Design of a 100 W Copper Vapor Laser[J]. Acta Optica Sinica, 1998, 18(10): 1422.