激光技术, 2006, 30 (2): 0130, 网络出版: 2010-06-03   

激光熔覆直接制造金属零件的组织及力学性能分析

Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding
作者单位
华中科技大学 激光技术国家重点实验室,武汉 430074
摘要
利用激光熔覆直接制造技术,采用不同的路径填充模式制备了不锈钢拉伸试样,对试样进行拉伸试验并对断口进行电镜扫描分析。结果表明,所制备的金属拉伸试样结合强度高,表现为韧性断裂,其屈服强度与断裂强度高于相近成分下常规加工方式所加工试样的相应值。激光扫描方向对拉伸性能的高低没有显著影响。拉伸试样显微组织晶粒细小,具有定向凝固特征。
Abstract
Some tensile samples of stainless steel have been fabricated directly by laser cladding with three path-filling models. The results show that the fracture character of tensile samples with high bond strength is ductile rupture,and the yielded strength and rupture strength are higher than the corresponding values of samples with the conventional processing methods. The orientation of laser scanning has no significant influence on tensile performance. Microstructure analyses of tensile samples by SEM show that crystalline grains are very fine and have the orientated solidification structures.

姬生钦, 李鹏, 曾晓雁. 激光熔覆直接制造金属零件的组织及力学性能分析[J]. 激光技术, 2006, 30(2): 0130. JI Sheng-qin, LI Peng, ZENG Xiao-yan. Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding[J]. Laser Technology, 2006, 30(2): 0130.

本文已被 8 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!