红外技术, 2014, 36 (6): 503, 网络出版: 2014-06-30  

基于SURF算法的产品表面缺陷检测研究

Product Surface Defect Detection Based on SURF Algorithm Research
作者单位
中北大学信息与通信工程学院,山西太原 030051
摘要
针对产品表面正确性的快速自动无损检测问题,提出了利用垂直投影法确定旋转步长来获取序列图像的方法,并将一种针对尺度旋转不变性( SIFT)改进的 SURF算法应用到此方面,该算法通过计算积分图像和 Hessian矩阵大大提高了特征点检测的速度,节省了图像匹配时所用的时间,并提高了算法的实时性。首先通过确定旋转步长来获取标准序列图库,其次通过 SURF算法寻找最优匹配位置,最后通过相关度的计算来判别各区域是否有缺陷。实验表明,在对待检测图像和标准序列图像库中的 5幅图像匹配时 SURF算法比 SIFT算法大约节省了 2.6 s,显然,把 SURF算法应用于序列图像中匹配可以大大节省缺陷检测时所用的时间。
Abstract
Aiming at the fast automatic NDT problem of correctness of product surface, in order to obtain image sequences, a method using vertical projection to determine the rotation is proposed, and the SURF algorithm which includes improved rotating invariance for scale(SIFT)is applied. The algorithm greatly increases the speed of feature point detection by calculating the integral image and Hessian matrix, and saves the image matching time and improves the real-time performance. Firstly, the standard sequence was got by determining the rotating step. Secondly, the optimal matching position was found through the SURF algorithm. Finally, correlation to distinguish whether the regional is flawed was caculated. Experiment results show that the SURF algorithm is betterthan SIFT algorithm, which saves about 2.6 seconds when matching five imagesof the detected image and standard image sequences. It is clear that the SURF algorithm is applied to sequence image matching can greatly save the time.

孙宝华, 韩跃平, 徐青, 赵静. 基于SURF算法的产品表面缺陷检测研究[J]. 红外技术, 2014, 36(6): 503. SUN Bao-hua, HAN Yue-ping, XU Qing, ZHAO Jing. Product Surface Defect Detection Based on SURF Algorithm Research[J]. Infrared Technology, 2014, 36(6): 503.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!