光子学报, 2007, 36 (7): 1219, 网络出版: 2007-09-17  

单模光纤端面衍射光束参量与其结构参数关系研究

Relationship Between Beam Parameters and Structure Parameters of Single Mode Fiber
作者单位
1 福建师范大学,激光与光电子技术研究所光子技术福建省重点实验室,福州,350007
2 浙江大学,信息与电子工程学系,杭州,310027
摘要
本文采用指数函数拟合光纤基模端面衍射场光束参量与光纤基本参数的关系,分别得到了各个光束参量与光纤归一化频率V和光纤芯层半径a关系的解析表达式.把曲线拟合得到的基于V和a表达的解析函数的计算结果,与基于光纤芯层参量U、包层衰减参量W和光纤芯层半径a表达的解析函数的计算结果相比,当1.5<V<9.4,最大相对误差都小于2%.这些表达式可为快速分析和计算光纤基模端面衍射光束参量提供理论支持.
Abstract
The exponential function is used to fit the curves between the beam parameters in the diffractive field of LP01 mode fiber end surface and the basic parameters of fiber. The fitting function between mode field radius in the near field, angular radius of far field divergence, beam propagation factor and the normalized frequency with the core layer radius are obtained respectively. The computed results from the fitting functions are very close to that from the analytical functions, when 1.5 <V< 9.4, the maximal relative error is smaller than 2%. In a certain degree, these conclusions will provide academic foundation for analyzing or calculating the beam parameters approximately.

李连煌, 郭福源, 胡林顺, 王力翔. 单模光纤端面衍射光束参量与其结构参数关系研究[J]. 光子学报, 2007, 36(7): 1219. 李连煌, 郭福源, 胡林顺, 王力翔. Relationship Between Beam Parameters and Structure Parameters of Single Mode Fiber[J]. ACTA PHOTONICA SINICA, 2007, 36(7): 1219.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!