中国激光, 1991, 18 (10): 770, 网络出版: 2007-11-12
CO2激光合成陶瓷的研究
Investigation of oxide ceramics synthesis using high power CO2laser
摘要
本文介绍了用CO2激光合成Al2O3、Al2O3-5%mol Cr2O3固熔体,Al2O3-20%wtZrO2(+3%molY2O3)混合体和Al2(WO4)3陶瓷材料的方法。激光合成的Al2(WO4)3为Al2O3-WO3二元平衡相图中不存在的新化合物。对激光合成的陶瓷材料进行了组织形貌分析,并测量了其显微硬度,发现用激光合成的陶瓷较用昔通工艺制备的同种陶瓷有更高的硬度。
Abstract
In this paper, A12O3, Al2O3-5%mol Cr2O3 and Al2O3-20%wt ZrO2 powders have been sintered to fabricate oxide ceramics with CO2 laser. The product of Al2(WO4)3 is-found as a new compound which can not be found in two-diminsional equilibrum phase-diagrams. The analysis of microstructure and hardness of the laser synthesized materials have been conducted. The hardnesses of laser synthesized materials are shown to be higher than that produced with the conventional sintering mothed in furnace.
李家镕, 郑启光, 陶星芝, 陶兴起, 李再光, 李兴教, 梁凤, 郑芳. CO2激光合成陶瓷的研究[J]. 中国激光, 1991, 18(10): 770. 李家镕, 郑启光, 陶星芝, 陶兴起, 李再光, 李兴教, 梁凤, 郑芳. Investigation of oxide ceramics synthesis using high power CO2laser[J]. Chinese Journal of Lasers, 1991, 18(10): 770.