中国激光, 2014, 41 (8): 0806001, 网络出版: 2014-07-15  

复合材料真空袋成型加压点的光纤光栅监测及优化

Monitoring and Optimizing the Pressured Point of Composite Vacuum Bag Molding Process with Fiber Bragg Grating sensors
作者单位
1 沈阳航空航天大学辽宁省通用航空重点实验室, 辽宁 沈阳 110136
2 沈阳航空航天大学航空航天工程学部, 辽宁 沈阳 110136
摘要
光纤光栅对复合材料固化过程中的应变和温度具有非常高的灵敏度。提出了利用双光纤光栅传感器监测复合材料真空袋成型固化过程的温度/应变变化,获得凝胶点信息,从而优化加压时机。实验结果表明,光纤光栅和动态力学分析法(DMTA)确定的凝胶点信息(凝胶温度/时间)非常一致,扫描电子显微镜(SEM)表明加压点优化后制备的复合材料具有最佳界面,中心层未出现分层情况。该方法可实现对复合材料固化工艺的监测与优化。
Abstract
Fiber Bragg grating (FBG) sensor is sensitive to strain and temperature during composite curing process. A new method is raised to monitor the temperature and strain with double FBG sensors during composite vacuum bag molding process. The gel point and pressured point are obtained and optimized. The experimental results show that the gel temperature and time obtained by FBG sensors and dynamic mechanical thermal analysis (DMTA) are very consistency, and the composite manufactured under optimum pressured point has excellent interface performance and no delamination in the middle layer from scanning electron microscopy (SEM). This method can realize monitoring and optimizing of composite vacuum bag molding process.

卢少微, 马克明, 熊需海, 王晓强, 贾彩霞. 复合材料真空袋成型加压点的光纤光栅监测及优化[J]. 中国激光, 2014, 41(8): 0806001. Lu Shaowei, Ma Keming, Xiong Xuhai, Wang Xiaoqiang, Jia Caixia. Monitoring and Optimizing the Pressured Point of Composite Vacuum Bag Molding Process with Fiber Bragg Grating sensors[J]. Chinese Journal of Lasers, 2014, 41(8): 0806001.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!