中国激光, 2008, 35 (8): 1250, 网络出版: 2008-08-16   

激光穿孔中辅助气体动力学性能分析

Dynamic Characteristic Analysis of Impinging Jet in Laser Drilling
作者单位
上海交通大学机械与动力工程学院, 上海 200240
摘要
通过基于结果的自适应算法对激光穿孔过程中的撞击射流场结构进行了计算。辅助气体与工件之间相互作用的本质过程可以描述为轴对称撞击射流过程,高压气体的轴对称撞击射流可以展示在高压状态下气体与工件之间的相互作用。气体射流与工件相互作用时,入射斜波与正激波发生直接接触和非接触的两种不同状态,分析了高压气体辅助激光切割第二个合理的加工区域的存在原因,加工参数对切口中气体动力学性能的影响,以及分析高压气体辅助加工能力随工件与喷嘴距离之间的关系。通常在入射斜波与正激波直接相互作用没有完成时,质量流率随工件与喷嘴距离变大而剧烈衰减,因此高压气体辅助激光切割时要尽可能保证工件与喷嘴的距离限定在合理的范围内。
Abstract
The interaction of an impinging jet in laser drilling is carried out using an explicit, coupled solution algorithm with solution-based mesh adaptation. The essential process of gas jet-workpiece interaction can be described through the description of axisymmetrical impinging jet. It is completely shown that there are two states including contact and separation between the incident shock and the normal shock in gas jet-workpiece interaction. At the same time, this paper shows the reason for the existence of the second reasonable ranges of laser cutting. The effect of processing parameter on dynamic characteristic is analyzed, and this paper also analyzes the relationship between machining capacity of assist gas and standoff distance. The mass flow rate decreases rapidly with the increase of standoff distance before the end of direct interaction between the incident shock and the normal shock, so the standoff distance should be set in reasonable ranges.

胡俊, 郭绍刚, 罗磊, 姚振强. 激光穿孔中辅助气体动力学性能分析[J]. 中国激光, 2008, 35(8): 1250. Hu Jun, Guo Shaogang, Luo Lei, Yao Zhenqiang. Dynamic Characteristic Analysis of Impinging Jet in Laser Drilling[J]. Chinese Journal of Lasers, 2008, 35(8): 1250.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!