中国激光, 2009, 36 (9): 2413, 网络出版: 2009-10-09   

(Ta2O5)1-x(TiO2)x基陶瓷介电温度系数激光热补偿改性研究

Study of Dielectric Temperature Coefficient of (Ta2O5)1-x(TiO2)x Based Ceramics Modified by Laser Thermal Compensation
作者单位
北京工业大学激光工程研究院,北京 100022
摘要
简要介绍了(Ta2O5)1-x(TiO2)x基陶瓷(x分别为0.3,0.4和0.5)的激光烧结技术。提出激光烧结和氧气退火相结合可以实现(Ta2O5)1-x(TiO2)x基负温度系数材料的热补偿,使其介电温度系数接近零。采用X射线衍射仪(XRD)与扫描电子显微镜(SEM)分析了炉烧样品、激光烧样品及其退火样品的介电性能。实现热补偿与氧缺位的变化有关,从而导致其温度系数的变化。
Abstract
Laser sinter technique for (Ta2O5)1-x(TiO2)x (x is 0.3, 0.4 and 0.5, respectively) based ceramics was briefly introduced in this paper. Thermal compensation of (Ta2O5)1-x(TiO2)x based negative temperature coefficient materials could be allowed by combination of laser sinter and annealing in oxygen, which tuned their dielectric temperature coefficient nearly to zero. Dielectric properties of specimens prepared by conventional sintering, laser sintering and its annealing sample in oxygen were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The results showed that thermal compensation of the negative temperature coefficient materials related to the oxygen defect, and led to the change of their temperature coefficients.

王宝军, 季凌飞, 蒋毅坚. (Ta2O5)1-x(TiO2)x基陶瓷介电温度系数激光热补偿改性研究[J]. 中国激光, 2009, 36(9): 2413. Wang Baojun, Ji Lingfei, Jiang Yijian. Study of Dielectric Temperature Coefficient of (Ta2O5)1-x(TiO2)x Based Ceramics Modified by Laser Thermal Compensation[J]. Chinese Journal of Lasers, 2009, 36(9): 2413.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!