强激光与粒子束, 2009, 21 (6): 813, 网络出版: 2009-11-24   

角锥棱镜阵列谐振腔的输出特性

Output properties of cube corner array resonator
作者单位
1 清华大学 精密测试技术与仪器国家重点实验室,北京 100084
2 中国工程物理研究院 激光聚变研究中心,四川 绵阳 621900
摘要
角锥棱镜阵列具有溯源反射和准相位共轭两大特点,可在一定程度上补偿高平均功率固体激光器的热畸变。但由于这种角锥棱镜阵列自身的缺陷和由它构成的谐振腔输出激光模式众多的特点,限制了其在谐振腔中的应用。分析了角锥棱镜阵列谐振腔产生多模输出的原因,提出了采用腔内滤波的方法实现单模输出。理论模拟和实验研究结果表明:利用该方法可较好地改善阵列角锥棱镜谐振腔的输出特性,获得了近5倍衍射极限的输出。
Abstract
The thermal distortions of a high average power solid-state laser could be compensated by cube corner arrays (CCA) due to the quasi phase conjugation.But the applications of a CCA have been limited when it is used as a resonator,because of the numerous cavity modes caused by its retro-reflection characteristics and the high loss caused by the edge diffraction of the CCA.The output properties of a cube corner array resonator are analyzed and a new method to obtain single mode has been proposed by using an intracavity filter to suppress the high order cavity modes.The theoretical and experimental results show that the output beam quality could be improved to nearly 5 times the diffraction limit by cube corner arrays with intracavity filter.

袁晓东, 蒋新颖, 郑建刚, 胡东霞, 段文涛, 金国藩. 角锥棱镜阵列谐振腔的输出特性[J]. 强激光与粒子束, 2009, 21(6): 813. Yuan Xiaodong, Jiang Xinying, Zheng Jian’gang, Hu Dongxia, Duan Wentao, Jin Guofan. Output properties of cube corner array resonator[J]. High Power Laser and Particle Beams, 2009, 21(6): 813.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!