光电技术应用, 2009, 24 (3): 75, 网络出版: 2009-12-30  

铝合金薄板点焊工艺研究

Research on Spot Welding Process of Aluminum Alloy Sheets
作者单位
东北电子技术研究所, 辽宁 锦州 121000
摘要
对利用改进的小型储能式点焊机对进口铝合金材料АМг-3М(0.5 mm)和国产铝合金材料3A21和2A12(0.8 mm 以下)的点焊工艺进行深入系统地试验和研究,确定了焊接工艺参数,掌握了焊接过程的控制方法.提出了多种工艺验证手段.结果表明,利用小型储能式点焊机,代替大型直流点焊机进行铝合金薄板焊接的工艺过程合理可行,设备经济实用.
Abstract
The process of welding foreign aluminum alloy material AMГ-3M(0.5 mm)and domestic aluminum alloy material 3A21/2A12(<0.8 mm) by improved small condenser spot welder was further studied and tested. The parameters of welding process were confirmed, the methods of welding process control were acquired, as well as various means of process tests were put forward. The results tests show that the small condenser spot welder can be used to weld the aluminum alloy sheets in stead of large DC spot welding machines, with feasible welding process and low costs.

张秀梅, 佟尚锋. 铝合金薄板点焊工艺研究[J]. 光电技术应用, 2009, 24(3): 75. ZHANG Xiu-mei, TONG Shang-feng. Research on Spot Welding Process of Aluminum Alloy Sheets[J]. Electro-Optic Technology Application, 2009, 24(3): 75.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!