中国激光, 2010, 37 (1): 281, 网络出版: 2010-01-16   

激光和化学复合刻蚀加工表面质量的实验研究

Experimental Study on the Quality of Material Surface Applied Laser-Chemical Combined Etching
作者单位
安徽建筑工业学院 激光先进制造技术中心,安徽 合肥 230022
摘要
利用激光烧蚀与化学腐蚀复合加工方法对试样进行实验加工,来研究激光脉冲能量、脉冲宽度、重复频率和激光束扫描速度等参数对金属试样加工表面形貌的影响规律和机理,并研究了腐蚀介质种类和其浓度对加工表面质量的影响。结果表明,化学腐蚀可以大大减少试样加工表面的熔渣,对降低表面粗糙度起到良好的作用;激光能量密度、脉冲宽度、重复频率和激光束扫描速度等参数对金属试样加工表面质量有重要的影响。
Abstract
Laser ablating and chemical eroding combined technique is applied to some typical kinds of high alloy steel experimental machining. And the effects on the surface quality of material sample dipped in different corrosive liquids of the laser energy density,repetition rate,pulse width,scan velocity and other parameters are studied and analyzed. The relations between those parameters and work piece dimensional precision are also investigated. Then internal causes of those relations are discussed. The resulfs show that chemical eroding reduces the slag on the laser ablating samples andsurface roughness,and the laser energy density,repetition rate,pulse width,scan velocity and other parameters signify the quality of machining surface.

袁根福, 姚燕生, 陈雪辉, 梁华琪, 朱绍峰. 激光和化学复合刻蚀加工表面质量的实验研究[J]. 中国激光, 2010, 37(1): 281. Yuan Genfu, Yao Yansheng, Chen Xuehui, Liang Huaqi, Zhu Shaofeng. Experimental Study on the Quality of Material Surface Applied Laser-Chemical Combined Etching[J]. Chinese Journal of Lasers, 2010, 37(1): 281.

本文已被 10 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!