光学 精密工程, 2008, 16 (6): 1093, 网络出版: 2010-02-28   

双密度小波在表面形貌信号分离中的应用

Application of double density wavelet transform to surface topographic signal separation
作者单位
哈尔滨工业大学 自动化测试与控制系,黑龙江 哈尔滨 150001
摘要
为减少表面功能评定中测量数据采样起始点位置对传统小波模型滤波结果的影响,提出了一种基于双密度小波变换的表面形貌分离新方法。将原始轮廓信号通过双密度小波分解为一系列小波函数和尺度函数的线性叠加,对表面各不同成分所对应的小波系数进行重构,即可得到所需的表面形貌的分离信号。仿真和实验验证表明:提出方法得到的分离粗糙度、波度等频率成分的准确性比其它方法提高了4%左右。新方法减小了采样点位置对滤波结果的影响,可以实现对表面特征平移不变的有效分离和提取,并提高了表面测量的精度。
Abstract
A novel signal separation method based on Double Density Wavelet Transform (DDWT) was presented to reduce the influence of the locations of sampling points on the filtering results from traditional wavelet in surface evaluation.The original profile signal could be decomposed by DDWT into a linear superposition of wavelet functions and scaling functions.After reconstruction of wavelet coefficients corresponding to different components,the required surface topographic discrete signal was obtained.The experiment results show that the separation accuracy of roughness,waveness and other frequency components can be higher about 4% than that of other methods.In engineering surface analysis,the new method can provide near shift-invariance in surface texture separation and extraction,and can decrease the influence of sampling points on filtering results and also improve the measurement precision.

李海燕, 刘国栋, 刘炳国, 浦昭邦. 双密度小波在表面形貌信号分离中的应用[J]. 光学 精密工程, 2008, 16(6): 1093. LI Hai-yan, LIU Guo-dong, LIU Bing-guo, PU Zhao-bang. Application of double density wavelet transform to surface topographic signal separation[J]. Optics and Precision Engineering, 2008, 16(6): 1093.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!