强激光与粒子束, 2009, 21 (12): 1851, 网络出版: 2010-02-28   

锁模激光脉冲串放大过程中的整形控制

Shaping of mode-locked pulse sequence in high-gain amplifier
作者单位
中国工程物理研究院 激光聚变研究中心,四川 绵阳 621900
摘要
为了获得具有特殊要求的驱动激光,设计了一套以Nd:YVO4锁模激光器为种子光,用二极管激光器泵浦的Nd:YAG放大系统进行放大的激光系统。对放大过程中锁模激光脉冲串因增益饱和造成的脉冲串包络畸变以及对包络的整形控制进行了研究。实验获得能量为24 mJ的基频光,5.7 mJ的倍频光,0.608 mJ的紫外四倍频光;通过脉冲串整形控制,实现了包络顶部平整的紫外超短脉冲串输出,满足了光阴极注入器对驱动激光的特殊需求。
Abstract
Using optic injectors driven by laser as the electron source is advantageous in the research of free electron laser. To get the driving laser meeting certain requirement,a laser system has been designed. In the laser system,a mode-locked Nd:YVO4 laser offers the seed pulse sequence and an laser diode array pumped Nd:YAG amplification system amplifies the seed sequence. In the amplification process,the shape of the sequence envelope is aberrated due to gain saturation effect. 24 mJ fundemental wave(1 064 nm),5.7 mJ second harmonic and 0.6 mJ fourth harmonic have been obtained respectively in the system. The aberration and the way to compensate are also studied experimentally. As a result,the ultraviolet sequence with flat-topped envelope was obtained after fourth harmonic conversion of the amplified sequence.

唐军, 丁磊, 邓青华, 罗亦鸣, 许党朋, 卢振华, 景峰. 锁模激光脉冲串放大过程中的整形控制[J]. 强激光与粒子束, 2009, 21(12): 1851. Tang Jun, Ding Lei, Deng Qinghua, Luo Yiming, Xu Dangpeng, Lu Zhenhua, Jing Feng. Shaping of mode-locked pulse sequence in high-gain amplifier[J]. High Power Laser and Particle Beams, 2009, 21(12): 1851.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!