中国激光, 2010, 37 (4): 1012, 网络出版: 2010-04-20  

基于倾斜多高斯光束叠加的均匀化照明整形方法

Beam Shaping Method for Uniform Illumination by Superposition of Multi-Tilted Gaussian Beams
作者单位
浙江大学 现代光学仪器国家重点实验室,国家光学仪器工程技术研究中心,浙江 杭州 310027
摘要
为了实现大功率半导体激光器堆叠进行均匀化照明设计,提出了基于倾斜多高斯光束(MTGB)叠加的均匀化照明方法。推导了倾斜多高斯光束模型的平均光强解析表达式,发现该光束模型的光强分布具有角分布平顶特性且不随传播而改变。通过在角度域和傅里叶频域对该光束模型的均匀性分析,得出影响其均匀性的因素,给出了数值计算验证。最后在ASAP光学软件中,实现了把半导体激光器堆叠整形成倾斜多高斯光束模型的具体方法,获得了12°×10°的均匀化照明效果。结果显示,该方法在半导体激光器Bar条间距快轴方向装配误差有±50 μm时,仍然可以获得75%的均匀性和80%以上的效率。方案具有现实可行性,适合作为主动激光成像的照明系统设计。
Abstract
A beam shaping method for laser diodes stack by superposition of tilted fundamental mode Gaussian beams to form a nearly uniform illumination is proposed. The analytical formula for average intensity of the multi-tilted Gaussian beams (MTGB) propagating is derived and used to study the uniform properties of the beam profile by the Fourier analysis method. It is found that the MTGB maintain the flat-topped shape as it propagates. And the uniform properties of the MTGB are closely related to the parameters of fundamental beams and superposition. Both analytical formula derivation and the numerical examples are illustrated. The method is then used to reconfigure the beams of a high power laser diodes stack to form a multi-tilted Gaussian beam shape for a 12°×10° field angle illumination,which is simulated in ASAP software. The shaping method with the proper uniformity and high efficiency is well suitable for laser illuminator in laser active imaging and detecting system.

姜燕冰, 严惠民, 张秀达, 姚金良. 基于倾斜多高斯光束叠加的均匀化照明整形方法[J]. 中国激光, 2010, 37(4): 1012. Jiang Yanbing, Yan Huimin, Zhang Xiuda, Yao Jinliang. Beam Shaping Method for Uniform Illumination by Superposition of Multi-Tilted Gaussian Beams[J]. Chinese Journal of Lasers, 2010, 37(4): 1012.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!