光子学报, 2009, 38 (3): 674, 网络出版: 2010-07-16   

四翼梁式次镜支撑结构的研究*

Crossed-plate Type Support Structure of the Second Mirror
作者单位
1 中国科学院长春光学精密机械与物理研究所,长春 130033
2 中国科学院研究生院,北京 100049
摘要
为了优化大型望远镜次镜支撑结构的静力学和动力学性能,采用有限元分析的方法,计算了次镜支座最大变形与次镜支座的偏置角、四翼梁叶片厚度的关系;分析了四翼梁结构的频率与叶片偏置角的关系.分析证明当次镜支座偏置一定角度时能改善结构的静力学性能;当相对的两片叶片从直径线上错开一定的距离,对提高望远镜的谐振频率是十分有利的,在两者之间综合取舍确定了四翼梁的优化形式.分析结果表明,优化后的四翼梁结构的静力学和动力学性能均有提高.
Abstract
In order to optimize the second mirror support of the modern telescope′s statics and dynamics performance,with the FEM method,the relationship between the second mirror tube max deformation and the second mirror tube offset angles and lamina thickness was calculated.Then the relationship between the crossed-plate type frequency and lamina offset angles was analyzed.The results approve that when the second mirror tube offset certain angles the statics performance can be improved,and when the two relative laminas staggered certain distance along the diameter the harmonic frequency can be increased.The crossed-plate optimized type was determined between the two cases.The calculated result confirmes the statics and the dynamics performance of the optimized crossed-plate type are all increased.

王富国, 张景旭, 杨飞, 吴小霞. 四翼梁式次镜支撑结构的研究*[J]. 光子学报, 2009, 38(3): 674. WANG Fu-guo, ZHANG Jing-xu, YANG Fei, WU Xiao-xia. Crossed-plate Type Support Structure of the Second Mirror[J]. ACTA PHOTONICA SINICA, 2009, 38(3): 674.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!