强激光与粒子束, 2010, 22 (2): 447, 网络出版: 2010-05-28   

赝火花开关放电的蒙特卡罗粒子模拟

Particle-in-cell simulation of pseudospark switch based on particle-in-cell plus Monte-Carlo collision method
作者单位
1 中国工程物理研究院 应用电子学研究所,四川 绵阳 621900
2 中国工程物理研究院 研究生部,北京 100088
摘要
采用粒子模拟和蒙特卡罗相结合的方法,应用静电求解模型,对赝火花开关初始放电过程进行了模拟。赝火花开关初始放电过程主要由汤森放电过程、等离子体形成、空心阴极效应和场致发射引发主放电组成;等离子体形成和空心阴极效应对赝火花开关的发展导通具有至关重要的作用。改变赝火花开关工作参数,如气压、电极孔径、阳极电压和阴极腔中初始粒子密度,研究其对赝火花开关电子峰值电流形成时间的影响。结果表明:随着气压、电极孔径、阳极电压和初始粒子密度的增大,赝火花开关电子峰值电流形成时间减小。
Abstract
The initial discharge process of pseudospark switch has been simulated via a electrostatic particle-in-cell plus Monte-Carlo collision method. The pseudospark discharge process mainly consists of Townsend process,plasma formation,hollow cathode effect and main discharge induced by field emission. The plasma formation and hollow cathode effect are critical for the conduction. Then the parameters,i.e. gas pressure,electrode borehole diameter,anode voltage and initial particle density,were varied and their effect on the forming time of electron peak current of the pseudospark switch was investigated. The results show that as the parameters increase,the forming time of electron peak current lessens.

秦风, 常安碧, 丁恩燕, 罗敏. 赝火花开关放电的蒙特卡罗粒子模拟[J]. 强激光与粒子束, 2010, 22(2): 447. Qin Feng, Chang Anbi, Ding Enyan, Luo Min. Particle-in-cell simulation of pseudospark switch based on particle-in-cell plus Monte-Carlo collision method[J]. High Power Laser and Particle Beams, 2010, 22(2): 447.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!