光学与光电技术, 2010, 8 (1): 59, 网络出版: 2010-05-31  

一种基于单负Metamaterials成对结构的带通滤波器的设计

Design of a Band-Pass Filter Based on Single-Negative Metamaterials Pair Structure
作者单位
1 哈尔滨工程大学理学院, 黑龙江 哈尔滨 150001
2 黑龙江大学集成电路重点实验室, 黑龙江 哈尔滨 150080
摘要
提出了一种基于单负Metamaterials对的带通滤波器的设计原理,给出了这种带通滤波器的谐振频率的表达式,对其谐振频率及带宽与其决定因素之间的关系进行了计算,对计算结果进行了讨论,为设计单负Metamaterial对带通滤波器的理论与方法提供了依据。研究结果表明:利用单负Metamaterials对的确可以实现带通滤波器;ENG板的磁导率μ1、MNG板的介电常数ε2、电等离子体频率ωep、磁等离子体频率ωmp、两个层的厚度比值a这五个因素决定了这种滤波器的中心频率;两个层的厚度及二者之间的比值决定这种滤波器的带宽。
Abstract
The design principle of a band-pass filter based on single-negative metamaterials pair structure is proposed in this paper. The expression of the resonance frequency of this kind of band-pass filter is given. The relations among the resonance frequency, band width of the band-pass filter and their deciding factors are calculated and discussed. The results reported here may offer the basis for the design theory and method of single-negative metamaterial pair band-pass filter. The investigation results show that the band-pass filter made of single-negative metamaterials pair can indeed be achieved. Five factors such as the permeability μ1 of the ENG layer, the permittivity ε2 of the MNG layer, the electric plasma frequency ωep, the magnetic plasma frequency ωmp, and the thickness ratio a of the two layers will determine the center frequency. The thicknesses of the two layers and the ratio between them will decide the band width of the band-pass filter. It is hoped that the results reported in this article may offer some references for the researchers and designers who are engaged in the area of metamaterials microwave devices.

王政平, 张振辉, 杨维. 一种基于单负Metamaterials成对结构的带通滤波器的设计[J]. 光学与光电技术, 2010, 8(1): 59. WANG Zheng-ping, ZHANG Zhen-hui, YANG Wei. Design of a Band-Pass Filter Based on Single-Negative Metamaterials Pair Structure[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2010, 8(1): 59.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!