激光技术, 2008, 32 (4): 0343, 网络出版: 2010-06-03   

SiO2-TiO2溶胶-凝胶薄膜的激光致密化研究

Study on the densification of SiO2-TiO2 sol-gel films by laser irradiation
作者单位
华中科技大学 武汉光电国家实验室,武汉 430074
摘要
为了研究激光直写技术在薄膜器件成型工艺中的应用,采用波长为1.07μm的连续光纤激光器对SiO2/Si基表面SiO2-TiO2多孔溶胶-凝胶薄膜进行致密化的方法,得到了激光功率密度对薄膜收缩率的影响规律以及热处理温度对薄膜的激光致密化功率密度阈值和厚度变化的影响结果。结果表明,薄膜收缩率随着激光功率密度的增加而增大。薄膜热处理温度越高,激光致密化功率密度阈值越高,达到薄膜致密化极限需要的激光能量越大。激光致密化机制是通过硅衬底吸收激光能量,然后以热传导的形式加热溶胶-凝胶疏松薄膜,实现薄膜致密化。
Abstract
In order to study the application of laser direct writing technology in the area of thin film elements rapid fabrication,the densification of SiO2-TiO2 porous sol-gel films on SiO2/Si wafer was performed by means of a continuous fiber laser with the wavelength of 1.07μm. The effect of laser power density on the shrinkage of the film was investigated. The thresholds of laser power density and the change of thickness of films under different preheated temperatures were discussed.Finally,the mechanism of laser densification of the SiO2-TiO2 films was also analyzed. The experimental results demonstrate that the shrinkage of films increases with the laser power density. The thresholds of laser power density will increase with increasing temperature in the process of laser densification. The energy of induced laser beam is absorbed by Si substrate instead of Sol-Gel film. The mechanism of laser densification of the SiO2-TiO2 films is mainly based on the shrinkage of nanon-scale pore due to the energy transfer from Si wafers.

李爱魁, 王泽敏, 刘家骏, 曾晓雁. SiO2-TiO2溶胶-凝胶薄膜的激光致密化研究[J]. 激光技术, 2008, 32(4): 0343. LI Ai-kui, WANG Ze-min, LIU Jia-jun, ZENG Xiao-yan. Study on the densification of SiO2-TiO2 sol-gel films by laser irradiation[J]. Laser Technology, 2008, 32(4): 0343.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!