光学学报, 2010, 30 (6): 1697, 网络出版: 2010-06-07
激光系统三维放大计算模型研究
Study on Three-Dimensional Amplifying Model the Laser System
激光器 二极管抽运放大器 端面抽运 三维放大模拟 lasers diode-pumped amplifier (DPL) end pumping three-dimensional amplifying simulation
摘要
基于激光脉冲在增益介质中的放大过程建立了三维放大模拟计算模型,该模型将自由空间传输与光线追迹放大相结合。在增益介质内抽运储能分布具有三维特点、离轴多程放大结构等复杂情况下,该模型能真实模拟放大后输出光束的近场分布。利用该三维放大模型针对一个12程激光二极管抽运钕玻璃放大系统进行模拟计算,计算结果准确地反映了输出光束近场分布。在此模拟结果的基础上能进一步优化多程放大光路。
Abstract
A three-dimensional amplifying model for the laser system is presented. Both free space transportion model and ray-tracing amplification model are included in this model. Using the model,the distribution of output laser beam from a complicated amplifying system close to the reality can be obtained. This model is used to simulate an amplification course in a 12-pass laser diode-pumped amplifying system. Simulation results precisely show the output distribution of the laser beam from the 12-pass amplifying system. Based on the simulation results,the 12-pass beamline can be further optimized.
邓青华, 丁磊, 贺少勃, 唐军, 谢旭东, 卢振华, 董一芳. 激光系统三维放大计算模型研究[J]. 光学学报, 2010, 30(6): 1697. Deng Qinghua, Ding Lei, He Shaobo, Tang Jun, Xie Xudong, Lu Zhenhua, Dong Yifang. Study on Three-Dimensional Amplifying Model the Laser System[J]. Acta Optica Sinica, 2010, 30(6): 1697.