强激光与粒子束, 2010, 22 (7): 1453, 网络出版: 2010-09-15   

多模光纤放大器输出光分析

Analysis of signal in multimode fiber amplifier
作者单位
1 四川大学 电子信息学院, 成都 610064
2 宜宾学院计算物理四川省高校重点实验室, 四川 宜宾644000
3 宜宾学院 物理与电子工程学院, 四川 宜宾644000
摘要
根据不同的泵浦方式, 对多模光纤放大器运用多模速率方程组, 采用四阶龙格-库塔法数值计算和分析了在不同泵浦方式下的泵浦效率和信号光在光纤放大器中的传输、放大行为, 并研究了在光纤放大器光纤长度有微小变化(mm量级)的情况下, 输出光的光束质量与光纤长度的关系。结果表明:输出信号光的光束质量因子随光纤长度微小变化而呈准周期变化, 周期与信号光耦合入光纤放大器的本征模式间的传播常数差有关。
Abstract
Through the fourth order Runge-Kutta formulas, the multimode rate equations, tailored to accommodate different pumping methods, are employed to evaluate the pumping efficiency and the signal power in the multimode fiber amplifier. The effect of the tiny change of fiber length (about millimeter level) on the output beam quality is studied. The beam quality factor varies quasi-periodically with the tiny change of fiber length. And the period is dependent on the propagation constant difference between the eigen modes of the amplifier.

傅玉青, 段志春, 陈建国. 多模光纤放大器输出光分析[J]. 强激光与粒子束, 2010, 22(7): 1453. Fu Yuqing, Duan Zhichun, Chen Jianguo. Analysis of signal in multimode fiber amplifier[J]. High Power Laser and Particle Beams, 2010, 22(7): 1453.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!