强激光与粒子束, 2010, 22 (11): 2733, 网络出版: 2010-12-07
工业CT切片图像直接生成快速原型层片数据
Direct generation of rapid prototyping slice data from industrial CT images
工业CT 快速原型 图像处理 层间轮廓插值 轮廓拟合 industrial CT rapid prototyping image processing interlayer contour interpolation contour fitting第22卷第11期强激光与粒子束Vol.2 No.11
摘要
为了将工业CT与快速原型直接集成, 提出了一种由工业CT切片图像直接生成快速原型层片数据的方法。首先对工业CT切片图像进行边缘提取、去噪、细化、连接和轮廓跟踪, 获取样件的内外结构轮廓点数据; 然后在相邻断层间建立轮廓匹配点对, 线性插值层间轮廓数据,以满足快速原型加工对层片厚度的要求, 并用三次B样条曲线对所有轮廓进行拟合; 最后经过轮廓数据点采样和内外轮廓判断后, 生成通用层接口文件输入快速原型系统。试验验证了该方法的有效性与正确性。
Abstract
To integrate industrial computed tomography(CT) technology with rapid prototyping(RP) directly, a new method creating an RP slice file directly from industrial CT slicing images is presented. Firstly, through edge extraction and contour de-noising, connecting, thinning and tracing, the basic contour point data of the interior and exterior structure of a sample piece are obtained. Subsequently, matching point pairs between adjacent layers are established, interlayer contours are got by linear interpolation, and then all contours are fitted by cubic B-spline curves. Finally, a CLI file is created after contour point sampling and interior and exterior contour recognizing. The CLI file is then input into an RP system and a product is manufactured. Applications of the method prove that it is effective and feasible.
段黎明, 许万源. 工业CT切片图像直接生成快速原型层片数据[J]. 强激光与粒子束, 2010, 22(11): 2733. Duan Liming, Xu Wanyuan. Direct generation of rapid prototyping slice data from industrial CT images[J]. High Power Laser and Particle Beams, 2010, 22(11): 2733.