红外技术, 2010, 32 (2): 81, 网络出版: 2011-01-05   

基于1.06/1.54μm激光的离轴折反式平行光管物镜设计

Optical Design of an Off-axis Aspheric Laser Collimator Based on 1.06/1.54 μm
作者单位
汉产品质量监督检验研究所国家红外及工业电热产品检验中心, 湖北 武汉 430043
摘要
设计了λ1=1.06gm,λ2=1.54gm,f=1000mm,D=167mm,2ω=0.6。的平行光管物镜,由于系统要求低成本、中心无遮拦且结构简单紧凑,故采用离轴折反射结构形式。初始结构中,主镜采用抛物面反射镜,在其成像光束中加入一个光焦度为零且有空气间隔的同种材料组成的双透镜组,消除了正弦差。同时为了减小补偿透镜组的口径,使它们适当地靠近像面位置。利用ZEMAX优化结果表明传递函数达到衍射极限,完全满足设计要求。
Abstract
This paper describes a method of designing a collimator with 1000 nun focal length, aperture of 167 mm and 0.6°~ field of view used when its primary wavelength is either 1.06 μm or 1.54μm. Choose off-axis catadioptric optical system to satisfy the request of low cost, without obscuration and simple- compact configuration. Primary mirror is an parabolic mirror in the original structure, then add same material made lenses, and the power of the combination is zero, it can help eliminating the offence against of sine condition. And get them close to the image plane properly to reduce the aperture of the double-separate lens. After optimizing the original data, MTF has achieved diffraction limit.

马洁, 曾宇武. 基于1.06/1.54μm激光的离轴折反式平行光管物镜设计[J]. 红外技术, 2010, 32(2): 81. MA Jie, ZENG Yu. Optical Design of an Off-axis Aspheric Laser Collimator Based on 1.06/1.54 μm[J]. Infrared Technology, 2010, 32(2): 81.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!