应用光学, 2010, 31 (6): 984, 网络出版: 2011-01-26   

大口径平面镜的计算机辅助瑞奇-康芒检验

Computer added Ritchey-Common test for large flat mirror measurement
作者单位
1 中国科学院西安光学精密机械研究所, 陕西 西安 710119
2 中国科学院研究生院, 北京 100039
3 上海微小卫星工程中心, 上海 200050
摘要
在瑞奇-康芒检测中,被检平面本身所固有的像散和大曲率在被检系统波像差数据中都表现为像散。由于被检平面处于发散光路中,这就使得平面面形与系统波像差之间的关系(即影响函数)变得十分复杂,推导起来十分困难,只能进行定性或半定量检测。文中介绍了如何通过计算机光线追迹模拟瑞奇-康芒检验,在两个瑞奇角下得到两组影响函数,以此建立过定方程组,由干涉仪检测得到的两个不同瑞奇角下的系统波像差,通过最小二乘法解过定方程组,拟合得到被检平面镜的面形误差;实现了大口径平面镜的定量检测,并以平面镜直接检验的面形误差作为对比,检验结果的一致验证了该方法的准确性与可行性。
Abstract
In Ritchey-Common test,the intrinsic astigmatism of the mirror plane under test and the astigmatism of the large curvature can not be distinguished in the measured system wave-front aberration. The flat is set in a divergent beam, which makes the relation between figure errors of flat and wavefront aberrations (influence function) complicate and difficult to derive. The procedure to simulate the Ritchey-Common test to derive the relationships between the figure errors of an optical flat and the wavefront aberrations, as well as the procedure to construct two set of influence functions by ray-tracing program are presented. Figure errors of the flat can be extracted from a set of over defined linear equations with the aid of least squares, using the influence functions and the measured wavefront aberrations for two different Ritchey angles. Both Ritchey-Common test and direct measurement results are presented. The comparison result proved the feasibility and reliability of this method.

孔小辉, 樊学武, 马臻, 庞志海, 余舜京. 大口径平面镜的计算机辅助瑞奇-康芒检验[J]. 应用光学, 2010, 31(6): 984. KONG Xiao-hui, FAN Xue-wu, MA Zhen, PANG Zhi-hai, YU Shun-jing. Computer added Ritchey-Common test for large flat mirror measurement[J]. Journal of Applied Optics, 2010, 31(6): 984.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!