强激光与粒子束, 2011, 23 (3): 569, 网络出版: 2011-04-01   

70 W全光纤超连续谱光源

All-fiber 70 W supercontinuum
作者单位
国防科学技术大学 光电科学与工程学院 定向能研究所, 长沙 410073
摘要
超连续谱光源在很多领域具有广泛而重要的应用,过去40多年一直是国际研究热点之一。但一方面由于普通双包层光纤与光子晶体光纤模场不匹配会导致较高的熔接损耗和耦合损耗;另一方面受高质量超快光纤脉冲激光器输出平均功率的限制,目前超连续谱光源的最高输出平均功率只有50 W。报道了一种全光纤结构的超连续谱光源,输出平均功率为 70 W。由于整个装置采用一种新的超连续谱形成机制,较好解决了普通双包层光纤与光子晶体光纤由于模场不匹配导致的较高熔接损耗和耦合损耗;降低了对脉冲泵浦源光谱质量的要求。
Abstract
Supercontinuum has a wide and important application in many fields, it is one of the hottest research topics during the past four decade. However, the splicing and coupling loss is a little high owing to the mismatch of mode area between double-clad fiber and photonic crystal fiber and the maximum average output power of the supercontinuum is 50 W due to limited average output power available of ultrafast fiber lasers with high quality. In this paper, a 70 W supercontinuum generation is constructed which not only overcomes the problem of high splicing and coupling loss between fiber and photonic crystal fiber caused by the mismatch of mode area, but also relaxes the spectral requirement for the pumping fiber laser sources.

宋锐, 陈胜平, 侯静, 陆启生. 70 W全光纤超连续谱光源[J]. 强激光与粒子束, 2011, 23(3): 569. Song Rui, Chen Shengping, Hou Jing, Lu Qisheng. All-fiber 70 W supercontinuum[J]. High Power Laser and Particle Beams, 2011, 23(3): 569.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!