中国光学, 2011, 4 (2): 196, 网络出版: 2011-04-28   

三维腹腔镜端面宽带增透膜的研制

Fabrication of broadband AR coating for three-dimensional laparoscopic facet
作者单位
长春理工大学,吉林 长春 130012
摘要
根据由多组镜片组成的三维腹腔镜对高透过率和不失真成像的要求,研究并选择了合适的薄膜材料;采用电子束真空镀膜加以离子辅助沉积系统,利用膜系设计软件完成了宽带增透膜的非周期膜系设计。通过调整镀膜工艺参数并采用光控与晶控同时监控的方法,减少了膜厚控制误差,成功地在多组镜片上镀制了宽带增透膜。测试试验显示,制备的膜层在400~700 nm波段的平均反射率<05%,而且颜色不失真,膜层牢固,抗腐蚀效果较好,满足医用光学仪器的使用要求。
Abstract
According to the requirements of a three-dimensional laparoscope consisting of many group lenses for the high transmittance and distortionless imaging, the appropriate film materials were chosen. Then, a coating design softwave was taken to realize the nonperiod coating system design of the anti-reflective coating by using the vacuum evaporation method and an ion assistant deposition system. By adjusting parameters of coating film and using the technique of optical control and crystal control simultaneously, the thick control error was reduced and the anti-reflection coating was coated on the lenses that were used in the laparoscopy successfully. The test results demonstrate that the average reflectance of the preparated coating is less than 0.5% and it shows color distortionless, securely layers and better effects of resistant to corrosion. These results meet operating requirements of medical optical instruments.

魏孜洵, 付秀华, 石澎, 梅禹珊. 三维腹腔镜端面宽带增透膜的研制[J]. 中国光学, 2011, 4(2): 196. WEI Zi-xun, FU Xiu-hua, SHI Peng, MEI Yu-shan. Fabrication of broadband AR coating for three-dimensional laparoscopic facet[J]. Chinese Optics, 2011, 4(2): 196.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!