应用光学, 2011, 32 (2): 211, 网络出版: 2011-05-13   

实现LED矩形均匀照明的透镜设计

Lens design for uniform illumination of rectangle area with LED
李竞 *
作者单位
杭州市亮灯监管中心,浙江杭州310006
摘要
随着大功率LED发射光强的不断提高,采用单粒LED为光源的照明系统已得到普遍应用。设计一种以LED为光源实现矩形均匀照明的透镜,根据微分几何的理论建立透镜面型所满足的微分方程,然后根据能量映射关系和能量守恒定律建立面型与目标面坐标点之间的关系,并通过四阶龙格-库塔法求解微分方程得到面型数据,利用所得的面型数据在三维建模软件Rhinoceros中构建出所求透镜面型,并将透镜导入ASAP进行模拟。模拟结果表明:该光学系统效率达到94.01%,目标面照度均匀性优于92.73%。最后分析了自由曲面的连续性,指出能量映射关系决定着自由曲面的连续性。
Abstract
Lens for uniform illumination of rectangle area with LED light source was designed. Based on differential geometry, a series of partial non-linear equations were constructed. According to the conservation law of energy, energy mapping relations between the source and the target plane were constructed. The points of the surface were obtained by solving the equations with fourth order Runge-Kutta formulas, and the desired free-form surface was got by curve fitting with Rhinoceros software. With ray tracing in ASAP software, the result indicates that the optical efficiency is more than 94.01%, and the illumination uniformity of the predetermined illumination area on the target plane is better than 92.73%. The continuity of the free-form surface was also analyzed, and the result shows that the continuity of the freeform surface is determined by energy mapping relations.

李竞. 实现LED矩形均匀照明的透镜设计[J]. 应用光学, 2011, 32(2): 211. LIJing. Lens design for uniform illumination of rectangle area with LED[J]. Journal of Applied Optics, 2011, 32(2): 211.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!