光学学报, 2011, 31 (11): 1114001, 网络出版: 2011-10-17   

激光会聚铬原子光栅三维特性分析

Properties of 3D Nanostructures Fabricated by Laser-Focused Cr Atomic Deposition
作者单位
1 同济大学物理系, 上海 200092
2 中国计量学院计量测试工程学院, 浙江 杭州 310018
3 清华大学精密测试技术及仪器国家重点实验室, 北京, 100084
摘要
采用近共振激光驻波场会聚铬原子沉积技术制作的原子光栅可以作为纳米级长度计量标准。基于粒子光学模型,综合考虑横向发散角、纵向速度分布以及同位素等影响因素,采用蒙特卡罗方法确定原子运动的初始条件,对激光驻波会聚原子的三维特性进行了研究。获得了不同激光功率下沉积条纹的三维结构,分析了纵向高斯激光分布和椭圆高斯激光截面对沉积条纹的影响。模拟结果表明,当激光功率为40 mW时,可观测的纳米光栅图案能在基板87%区域内出现,对应于高斯光束中心处条纹半峰全宽为31 nm。当高斯激光束截面为圆形时,沉积质量较好。
Abstract
Periodic nanostructures fabricated by atom lithography using standing-wave light field can be applied for nanometrology. Atom-optical properties of 3D standing-wave light field are studied with particle optics model.The initial condition of each trajectory is stochastically selected with Monte-Carlo method, where the effects of isotope, longitudinal velocity distribution and transverse Gaussian divergence are systematically evaluated. 3D nanostructures with varying laser powers are presented,which shows the effect of longitudinal Gaussian distribution of the light field. The effect of elliptical standing wave is also discussed. It is shown that well-defined nano-grating lines appear in 87% of the substrate and full width at half maximum (FWHM) obtained at the center of Gaussian laser beam is 31 nm when the laser power is 40 mW. Good results can be obtained when the shape of the cross section of the standing wave is round.

张萍萍, 马艳, 张宝武, 李同保. 激光会聚铬原子光栅三维特性分析[J]. 光学学报, 2011, 31(11): 1114001. Zhang Pingping, Ma Yan, Zhang Baowu, Li Tongbao. Properties of 3D Nanostructures Fabricated by Laser-Focused Cr Atomic Deposition[J]. Acta Optica Sinica, 2011, 31(11): 1114001.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!