应用光学, 2011, 32 (5): 872, 网络出版: 2011-11-18   

推扫式线阵TDI CCD扫描调制传递函数分析

Scanning modulation transfer function analysis of push-broom linear TDI CCD
作者单位
中国科学院 长春光学精密机械与物理研究所, 吉林 长春 130033
摘要
根据线阵TDI CCD离散采样的特点,以采样间距内成像调制度均值为基础,构建了推扫成像模式下线阵TDI CCD扫描方向的调制传递函数。该调制传递函数的数值分析表明: 对于像元为10 μm的线阵TDI CCD,行转移驱动时钟相数为4, 3或2时,Nyquist频率处调制传递函数值分别为0.363,0.333或0.255; 行频误差为1%及3%时,不同积分级数下调制传递函数变化曲线表明,增大行频误差及增加积分级数将使调制传递函数值减小,图像分辨率降低。成像实验结果符合所构建调制传递函数的定量分析结论。
Abstract
Scanning modulation transfer function (MTF) for linear time-delay integration (TDI) charge coupled device (CCD) using push-broom imaging mode was established. The MTF which took the discrete sampling characteristics of linear TDI CCD into account, was based on the imaging modulation mean within sampling interval. The numerical analysis of the proposed MTF indicated that the value of MTF at Nyquist frequency for linear TDI CCD with 10 μm pixel size was 0.363, 0.333 and 0.255 respectively, when the number of row transfer phase clocks was 4, 3 and 2. When the row frequency error was 1% or 3%,the changes of MTF curves with different integration numbers implied that increasing the row frequency error and the integration number could decrease the value of MTF and reduce the image resolution. The results of imaging experiment agree with the quantity analysis of the proposed MTF.

杨永明, 李昕阳, 赵嘉鑫. 推扫式线阵TDI CCD扫描调制传递函数分析[J]. 应用光学, 2011, 32(5): 872. YANG Yong-ming, LI Xin-yang, ZHAO Jia-xin. Scanning modulation transfer function analysis of push-broom linear TDI CCD[J]. Journal of Applied Optics, 2011, 32(5): 872.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!