光学技术, 2011, 37 (6): 647, 网络出版: 2011-12-01   

基于视频图像测量的母线折弯技术研究

Investigation of busbar bending technology based on video image measurement
作者单位
1 昆明理工大学 机电工程学院, 云南 昆明 650093
2 昆明昆开专用数控设备有限责任公司, 云南 昆明 650106
摘要
现有折弯机在母线的角度测量中一般采用光栅尺或编码器, 针对这种接触式检测方法存在的局限性, 提出了基于视频技术的角度检测方法, 这种非接触式测量方法不仅使角度的检测更加方便, 而且增加了折弯机机头机械设计的灵活性。分析了母线在进行边缘检测时角度存在跳动的原因, 提出了一种通过抑制伪边缘的方法来控制检测角度的不稳定性。以铜、铝母线为原型, 将设计的光学检测系统应用在数控折弯机上, 通过单片机控制油缸的动作, 实现了母线的折弯过程。实验结果表明, 在折弯机中采用视频技术测量母线折弯角度, 不仅可以降低系统的开发成本, 而且可以减轻机械结构的复杂性, 同时也使角度的检测更加简单。
Abstract
On account of some boundedness of busbar angle detection on bending machine, which adopts contact measurement such as grating bar and encoder, a video technology for angle detection is proposed. This is a contactless measurement which can make the angle detection more convenient and the machine design of bending machine head more flexible. The jumpy reasons about busbar edge detection are analyzed. The way for restraining the angle jump which adopts controlling pseudo edge is proposed. For the prototype with aluminum and copper busbar, the bending is achieved, which applies the optical monitoring system to the CNC bending machine and controlling the oil cylinder action which is used AT89S52 single-chip. The experiment results show that using video technology to measure the busbar bending angle in the CNC bending machine not only can reduce the cost of system development, but also can relieve the complicacy of the mechanism, and make the angle detection more easily.

陈立兵, 樊瑜瑾, 代杰, 郭波江, 孙宏德. 基于视频图像测量的母线折弯技术研究[J]. 光学技术, 2011, 37(6): 647. CHEN Libing, FAN Yujin, DAI Jie, GUO Bojiang, SUN Hongde. Investigation of busbar bending technology based on video image measurement[J]. Optical Technique, 2011, 37(6): 647.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!