采用蒙特卡罗方法对闪烁光纤阵列探测器在高能X射线入射下的串扰进行了模拟研究，并且分析比较了加铅层对串扰的影响.研究中采用对表征成像系统空间分辨率参量——调制传递函数进行模拟分析和比较，得到在光纤阵列之间加入不同铅层厚度后对系统调制传递函数参量曲线的影响.研究结果表明：在高能射线下，采用闪烁光纤阵列作为成像探测器存在严重的次级粒子相互串扰的现象，而在阵列之间加入铅介质能够减少这种效应; 但另一方面，若所加铅层太厚又会导致成像探测器像素过大而使得空间分辨率下降.通过模拟计算得出：只要在阵列之间加入适当厚度的铅介质，既可以有效抑止阵列之间次级粒子的串扰，同时又能提高闪烁光纤阵列探测器系统的空间分辨率.

The crosstalk in plastic scintillating fiber array detector with highenergy gamma incident was studied through MonteCarlo simulation. The relationship between crosstalk and lead layer was also analyzed. Modulate transfer function(MTF),which shows quantity of spatial resolution of imaging detector, was analyzed and compared in order to get the MTF results caused from the difference thickness of lead layer. The results show that there exists severe crosstalk in the detector irradiated by highenergy particles, and the lead layer can reduce the effect. On the other hand, the pixel of detector may become big as the lead layer is introduced, which can reduce the spatial resolution. Through the simulation computation, it is proved that the right thickness of lead layer will reduce crosstalk and increase spatial resolution of imaging detector.