应用光学, 2011, 32 (6): 1222, 网络出版: 2012-01-11   

红外波段复合消色差1/4波片的优化设计

Optimization design of infrared composite achromatic λ/4 wave plate
作者单位
1 青岛理工大学 理学院,山东 青岛 266033
2 中国石油大学 物理科学与技术学院,山东 东营 257061
3 曲阜师范大学 激光研究所 ,山东 曲阜 273165
摘要
在三元复合式消色差波片设计的基础上,对拓宽消色差范围的重要因素——单波片延迟量和复合角度进行了进一步分析和测试,提出了优化设计方案;利用石英晶体设计了适用于红外光通信波段的复合消色差波片。理论和实验均表明:通过调整单波片延迟量或改变复合角度可使该波片在中心波长为1 400 nm的900 nm~1 800 nm波长范围内最大延迟偏差≤5%,而在光通信波段(1 200 nm~1 600 nm)该复合波片的最大延迟偏差只有3.2%。
Abstract
According to the design of three-in-one composite achromatic wave plate, an infrared composite achromatic λ/4 wave plate made of quartz was designed, which could be used in optical communication wave band. We further analyzed and tested the wave plate phase delay and composite angle which were the important factors influencing the achromatism scope, and put forward an optimum design scheme. Theoretical analysis and experimental result show that by adjusting the wave plate phase delay or composite angle, the maximum delay deviation for 1/4 composite achromatic wave plate achieves ≤5% in the wavelength range of 900 nm~1 800 nm with the central wavelength of 1 400 nm,which meets the achromatic requirements; in the optical communication wave band of 1 200 nm~1 600 nm, the maximum delay deviation achieves only 3.2%.

郑春红, 朱化凤, 宋连科. 红外波段复合消色差1/4波片的优化设计[J]. 应用光学, 2011, 32(6): 1222. ZHENG Chun-hong, ZHU Hua-feng, SONG Lian-ke. Optimization design of infrared composite achromatic λ/4 wave plate[J]. Journal of Applied Optics, 2011, 32(6): 1222.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!