光学学报, 2012, 32 (2): 0222002, 网络出版: 2012-01-11   

实现均匀照明的LED系统设计方法 下载: 885次

Lens Design for Uniform llIumination with LED
作者单位
1 中国科学院西安光学精密机械研究所瞬态光学与光子技术国家重点实验室, 陕西 西安 710119
2 北京化工大学机电工程学院, 北京 100029
摘要
针对医用无影灯的应用要求,提出了一种利用非球面透镜实现对目标平面均匀照明的方法。基于能量守恒定律得到光源出射角与目标面之间的关系,利用Zemax的宏语言编写优化操作数使透镜优化满足上述关系,在非序列模式中对结果进行模拟和优化,并分别对透镜的前表面三种情况进行模拟,提出并模拟了LED球面阵列,并分析了角度及距离的偏移对照明均匀度的影响。结果表明,1 m距离处实现了直径为25 cm的平面内的均匀照明,均匀度(平均照度/最大照度)达到96%以上;球面阵列的设计可以满足无影灯的光分布要求,照明深度达到1 m。
Abstract
A new method that the target plance is uniformly illuminated with aspheric lens is proposed. Based on the energy conservation law, it can be figured out the angle between the light source and the target surface, and the macro language of Zemax is used to make the lens meet the above mentioned relation, simulating and optimizing the result in the non-sequential mode and respectively simulating the three cases of the front surface. It is proposed and simulated a spherical LED array, and analysised the effect of the illumination uniformity of the angle and distance offsets . The result shows that the uniform illumination in a distance of 1 m and 0.25 m in diameter of the plane is achieved, with the uniformity of 96% or more. The spherical array meets the application requirements of shadowless lighting and the depth of illumination up to 1 m.

李林, 王光珍, 王丽莉, 孔德鹏, 姬江军, 张亚军. 实现均匀照明的LED系统设计方法[J]. 光学学报, 2012, 32(2): 0222002. Li Lin, Wang Guangzhen, Wang Lili, Kong Depeng, Ji Jiangjun, Zhang Yajun. Lens Design for Uniform llIumination with LED[J]. Acta Optica Sinica, 2012, 32(2): 0222002.

本文已被 27 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!