中国激光, 2012, 39 (3): 0316001, 网络出版: 2012-03-01   

影响方形非球面光学元件加工精度的工艺研究

Research on Technology of Influence Square Aspheric Optical Element Processing Accuracy
作者单位
1 长春理工大学机电工程学院, 吉林 长春 130021
2 长春设备工艺研究所超精密加工技术研究室, 吉林 长春 130012
摘要
分析了方形非球面光学元件磨削加工中产生四角塌边误差的原因,计算了方形非球面光学元件磨削加工时砂轮轴系两种安装方式的磨削系统刚度,讨论了砂轮轴系安装的位置对加工精度的影响,进行了砂轮轴系两种安装方式的方形光学元件磨削试验,以及不同砂轮型号、工艺参数的磨削试验,确定了能够满足方形非球面光学元件加工精度的砂轮轴系安装位置结构及磨削工艺参数。
Abstract
The reason of making propeller error in grinding square aspheric optical elements is analyzed. Each rigidity index of two fixing methods of abrasion wheel axis is calculated, and then the influence of abrasion wheel axis fixing position on the processing accuracy. The experiment at each position is done. Different abrasion wheel and different processing parameter are used to do the grinding experiment. Finally, the abrasion wheel axis fixing position and the grinding processing parameter which can satisfy the processing accuracy of square aspheric optical element are obtained.

吴庆堂, 聂凤明, 王大森, 史国权, 吴焕, 李珊, 郭波. 影响方形非球面光学元件加工精度的工艺研究[J]. 中国激光, 2012, 39(3): 0316001. Wu Qingtang, Nie Fengming, Wang Dasen, Shi Guoquan, Wu Huan, Li Shan, Guo Bo. Research on Technology of Influence Square Aspheric Optical Element Processing Accuracy[J]. Chinese Journal of Lasers, 2012, 39(3): 0316001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!