现代显示, 2012, 23 (3): 18, 网络出版: 2012-03-30  

显示器防护玻璃表面处理技术

Display Protective Glass Surface Treatment Technology
作者单位
江苏金陵机械制造总厂, 江苏 南京 211100
摘要
采用酸溶液湿法腐蚀和镀制增透、保护膜层的方法,对某型仪表用显示器防护玻璃表面进行了工艺处理,使得表面反射率降低到2%以下,产品可见光波段平均透过率达到86%,表面硬度提高到7.0GPa。产品性能检测和试用情况表明,防护玻璃具有较好的防眩、增透和抗划伤的作用,使用效果良好。
Abstract
Display protective glasses of a certain type instrument were technically processed by use of wet etching with acid solution and AR protective coating method. The reflectivity of surface was reduced to 2% below, the average transmittance of products was 86% in visible light, and the hardness of surface was enhanced to 7.0 GPa. The products' performance testing and trials expressed that, the protective glasses have good anti-glare, antireflective, scratch-resistant process and good behaviors.

王保松, 张国升, 谢钦. 显示器防护玻璃表面处理技术[J]. 现代显示, 2012, 23(3): 18. WANG Bao-song, ZHANG Guo-sheng, XIE Qin. Display Protective Glass Surface Treatment Technology[J]. ADVANCED DISPLAY, 2012, 23(3): 18.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!