中国激光, 2012, 39 (5): 0503001, 网络出版: 2012-04-13   

选区激光熔化成型悬垂结构的计算机辅助工艺参数优化

Computer-Aided Optimization of the Process Parameters for Fabricating Overhanging Structure by Selective Laser Melting
作者单位
华南理工大学机械与汽车工程学院, 广东 广州 510640
摘要
为了提高选区激光熔化(SLM)成型悬垂结构的质量,从调节成型方向和能量输入入手研究悬垂结构的计算机辅助工艺参数优化。以减小零件模型整体难成型悬垂面的面积为目标,以零件模型非成型方向的两个旋转角度为优化变量,建立成型方向的优化模型,并基于遗传算法实现优化模型参数的求解。通过遍历零件模型中的所有三角面片,建立倾斜角静态查找表,并在成型时查表实现能量输入的实时调节。实验结果表明,经成型方向优化,零件模型难成型悬垂面的面积从555.12 mm2减小为16.211 mm2,所需支撑数量明显减少;成型后所得零件无明显悬垂物和翘曲变形,成型质量明显改善。
Abstract
To improve the fabricating quality of overhanging structure in selective laser melting (SLM), the computer-aided optimization of process parameters is studied, which focuses on the fabrication orientation and the power input. The optimization model of the fabrication orientation, which is aiming at reducing the difficultly fabricating overhanging surface area, is proposed. The genetic solution for the model is studied. The static lookup table to adjust the energy input duly is built by traversing all the triangles in the stereo lithography (STL) file. The experimental results show that the difficultly fabricating overhanging surface area reduces from 555.12 mm2 to 16.211 mm2 after the optimization of the fabrication orientation, which leads to the less support needs, and the fabrication quality is obviously improved without so much overhang and deformation.

刘杰, 杨永强, 王迪, 肖冬明, 苏旭彬. 选区激光熔化成型悬垂结构的计算机辅助工艺参数优化[J]. 中国激光, 2012, 39(5): 0503001. Liu Jie, Yang Yongqiang, Wang Di, Xiao Dongming, Su Xubin. Computer-Aided Optimization of the Process Parameters for Fabricating Overhanging Structure by Selective Laser Melting[J]. Chinese Journal of Lasers, 2012, 39(5): 0503001.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!