强激光与粒子束, 2012, 24 (4): 925, 网络出版: 2012-05-08   

大功率恒流源取样电阻设计

Design of sampling resistor of high power constant-current source
作者单位
中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
摘要
针对取样电阻在大功率恒流源中的作用和技术要求,在理论和实验上对取样电阻的设计原则、结构形式和材料选择方法进行了系统分析。对水冷式和自冷式两种结构形式的大功率恒流源取样电阻进行了比较研究,实验结果表明:相比于水冷式取样电阻情形,装配自冷式取样电阻的恒流源主要技术指标得到明显改善,输出电流失稳度降低2/3,纹波系数由2.7%降低到2.3%,使用寿命提高10倍以上。
Abstract
According to the function and technical requirements of the sampling resistor in high power constant-current source, the design principle, structure and choice criterion of the material of the resistor were systematically summarized based on theoretical analysis and experimental study.The water-cooling and self-cooling sampling resistors of high power constant-current source were compared. The experimental results show that, compared with water-cooling sampling resistor, the self-cooling sampling resistor improves the stability of the constant-current source three times, reduces the ripple coefficient from 2.7% to 2.3%, and increases the life time more than 10 times.

赵娟, 李波, 于治国, 曹宁翔, 黄雷, 李玺钦, 黄斌, 王卫, 李亚维. 大功率恒流源取样电阻设计[J]. 强激光与粒子束, 2012, 24(4): 925. Zhao Juan, Li Bo, Yu Zhiguo, Cao Ningxiang, Huang Lei, Li Xiqin, Huang Bin, Wang Wei, Li Yawei. Design of sampling resistor of high power constant-current source[J]. High Power Laser and Particle Beams, 2012, 24(4): 925.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!