中国激光, 2012, 39 (7): 0702001, 网络出版: 2012-05-18   

碳基吸收体被动锁模大功率皮秒激光器 下载: 502次

High Power Picosecond Lasers Mode Locked with Carbon Based Absorbers
作者单位
1 香港理工大学应用物理系, 香港
2 山东师范大学物理与电子学院, 山东 济南 250014
摘要
采用垂直蒸发法分别在玻璃和石英衬底上淀积单壁碳纳米管和氧化石墨烯材料来制作碳基可饱和吸收体。利用单壁碳纳米管作为饱和吸收体,实现了NdYVO4激光器被动锁模,最高输出功率为3.6 W,斜率效率为31%,脉冲宽度为7.6 ps,重复频率为75 MHz。利用氧化石墨烯作为可饱和吸收体,实现了NdGdVO4激光器被动锁模,最大输出功率为1.1 W,斜率效率为11.3%,脉冲宽度为4.5 ps,重复频率为70 MHz。
Abstract
Single walled carbon nanotubes and graphene oxide are deposited on glass and quartz by vertical evaporation method, respectively. By using single walled carbon nanotubes absorber, passively mode locked NdYVO4 laser is obtained. The maximum output power is 3.6 W, the slope efficiency is 31%, the pulse duration is 7.6 ps and the repetition rate is 75 MHz. By using graphene oxide absorber, passively mode locked NdGdVO4 laser is achieved. The maximum output power is 1.1 W, the slope efficiency is 11.3%, the pulse duration is 4.5 ps and the repetition rate is 70 MHz.

王勇刚, 曲遵世, 刘杰, 曾远康. 碳基吸收体被动锁模大功率皮秒激光器[J]. 中国激光, 2012, 39(7): 0702001. Wang Yonggang, Qu Zunshi, Liu Jie, Yuen Hong. High Power Picosecond Lasers Mode Locked with Carbon Based Absorbers[J]. Chinese Journal of Lasers, 2012, 39(7): 0702001.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!