激光技术, 2012, 36 (3): 398, 网络出版: 2012-05-22   

3孔预准直后铬原子束横向位置分布仿真

Simulation of transverse position distributions of Cr atomic beam pre-collimated by three apertures
作者单位
1 中国计量学院 计量测试工程学院,杭州 310018
2 清华大学 精密测试技术及仪器国家重点实验室,北京 100084
3 同济大学 上海市特殊人工微结构材料与技术重点实验室,上海 200092
摘要
为了研究52Cr原子以外其它同位素对铬原子束横向位置分布的影响,采用蒙特卡罗方法对3孔预准直狭缝条件下的1维激光冷却进行了理论分析。由分析可知,在区分52Cr原子和其它同位素条件下,原子束横向位置分布的基底会有所增加,每一部分原子束的特征值也有明显的变化,中心部分原子束中心最大值有9.5%的降低,半峰全宽有2.9%的增加;两侧每一部分原子束的中心最大值有25%的增加,半峰全宽略有增宽。结果表明,其它同位素的区分与否对中心部分原子束的中心最大值和半峰全宽影响很小。
Abstract
In order to study the effect of isotopes except for 52Cr on the transverse position distribution of Cr atomic beam, simulation was carried out for 1-D transverse laser cooling with a three-aperture pre-collimating slit by means of Monte Carlo method. The results show that isotopes except for 52Cr can make the background increased and affect characteristics of each part of the atomic beam: the central maximum value decreases 9.5% and its full width at half maximum(FWHM)increases 2.9% in the center; while the maximum value increases 25% with little increase of the FWHM in either side. It concludes that the existence of the isotopes except for 52Cr has little effect on the center maximum value and FWHM of the center part atomic beam.

张宝武, 马艳, 张萍萍. 3孔预准直后铬原子束横向位置分布仿真[J]. 激光技术, 2012, 36(3): 398. ZHANG Bao-wu, MA Yan, ZHANG Ping-ping. Simulation of transverse position distributions of Cr atomic beam pre-collimated by three apertures[J]. Laser Technology, 2012, 36(3): 398.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!