光学技术, 2012, 38 (3): 345, 网络出版: 2012-05-24   

基于均匀照明的LED反射器的设计

Reflector design for LED based on uniform illumination
作者单位
1 燕山大学 理学院, 河北 秦皇岛 066004
2 北京工商大学 材料与机械工程学院, 北京100048
摘要
为了创造良好的视觉环境,并提高光能利用率,设计了一种基于均匀照明的LED反射器。之所以选用球面环形阵列LED光源,第一是为扩大照明范围,其次是为了避免面光源垂直照射产生光强过强而导致的眩晕。设计的反射器是运用划分网格的方法获得自由曲面面型,运用机械建模软件拟合曲面的实体模型,进行了照明仿真模拟及分析。结果表明,与传统的反光器相比,自由曲面的反射器能较大程度地利用光源发出的能量,而且均匀性也有很大的提高。
Abstract
In order to allow people to have a good visual environment, also to make better use of light, it is important that to design a kind of reflectors for LED based on uniform illumination. Light sources is put in spherical annular array to avoid the vertigo, owing to excessive light intensity, that is produced if light source vertical illumination; but also to expand the scope of the lighting. This kind of reflectors is made up of free-form points that are obtained by distribution using grid method. Then the solid model is set up using mechanical modeling software and another then use the optical simulation software to carry out the illumination. The results illustrate that the free-form reflector can make a better use of light energy than the old one. Uniformity is greatly improved.

许耀云, 井西利, 丁金刚, 马毅恒, 靳李丽, 邢小宁. 基于均匀照明的LED反射器的设计[J]. 光学技术, 2012, 38(3): 345. XU Yaoyun, JING Xili, DING Jingang, MA Yiheng, JIN Lili, XING Xiaoning. Reflector design for LED based on uniform illumination[J]. Optical Technique, 2012, 38(3): 345.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!