强激光与粒子束, 2012, 24 (6): 1449, 网络出版: 2020-12-21   

亚微秒脉冲下高梯度绝缘子的沿面闪络特性

Vacuum surface flashover studies of high gradient insulator under sub-microsecond pulse
作者单位
中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
摘要
介绍了一种由聚酰亚胺和不锈钢叠加而成的高梯度绝缘子的实验研究工作。该绝缘子样品的直径60 mm,厚度8 mm,在脉冲宽度120 ns(FWHM)的电压脉冲加载下最高获得了接近13 MV/m的绝缘强度。研究了测试方法以及绝缘层厚度与金属层厚度的比例对高梯度绝缘子绝缘强度的影响,并与相同尺寸的普通材料绝缘子的绝缘强度进行了对比。结果表明,高梯度绝缘子的绝缘强度明显高于仅由聚酰亚胺构成的普通绝缘子。
Abstract
Experimental studies of the vacuum surface flashover of high gradient insulators (HGI) made of Kapton and stainless steel are introduced in this paper. The HGI samples are all 60 mm in diameter and 8 mm in height. The highest peak gradient held under the 120 ns (FWHM) voltage pulse is nearly 13 MV/m. Studies about the testing methods and the thickness ratio between the insulator and the metal are also discussed in this paper. Moreover, comparison of the insulate strength between the HGI samples and the insulator made of conventional materials are presented. The result indicates that the performance of the HGI samples is obvious better than the conventional insulator made of pure Kapton.

朱隽, 夏连胜, 陈思富, 何佳龙, 张开志, 石金水, 章林文, 邓建军. 亚微秒脉冲下高梯度绝缘子的沿面闪络特性[J]. 强激光与粒子束, 2012, 24(6): 1449. Zhu Jun, Xia Liansheng, Chen Sifu, He Jialong, Zhang Kaizhi, Shi Jinshui, Zhang Linwen, Deng Jianjun. Vacuum surface flashover studies of high gradient insulator under sub-microsecond pulse[J]. High Power Laser and Particle Beams, 2012, 24(6): 1449.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!