光学学报, 2012, 32 (11): 1123001, 网络出版: 2012-08-17   

四频差动激光陀螺最佳工作点实时控制技术

Real-Time Control Technique of Optimal Operating Point in Four-Mode Differential Laser Gyro
作者单位
国防科技大学光电科学与工程学院, 湖南 长沙 410073
摘要
为了降低四频差动激光陀螺(FMDLG)零偏对外界因素影响的敏感性,采用了最佳工作点实时控制技术。该技术使用色散平衡和稳频偏置的方法,对增益区磁场和失谐频率进行小幅度正弦调制,在FMDLG输出零偏中解调出误差信号,经负反馈控制回路使FMDLG在对外界干扰敏感性最小的唯一最佳工作点下工作。与仅使用光强差进行稳频的传统方法相比,最佳工作点控制技术大大降低了FMDLG的磁敏感度和零偏稳定性,证实了FMDLG最佳工作点实时控制技术的有效性;静态、动态测试实验结果证明了该技术的正确性。
Abstract
In order to minimize the bias sensitivity of a four-mode differential laser gyro (FMDLG) to external interference, an optimal operating point real-time control technique is adopted. Dispersion equalization and path-length control offset are used. The magnetic field of gain zone and detune frequency are sinusoidally modulated, then the error in the bias of FMDLG is demodulated. By negative feedback it is operated at the only optimal point on which the sensitivity to interference is smallest. The optimal operating point means the minimum bias sensitivity to magnetic field and path-length control error. In comparison with traditional path-length control method, the optimal operating point real-time control technique shows a great reduction of the gyro magnetic sensitivity and bias instability, which proves its effectiveness,and static and dynamic test results prove its correctness.

王飞, 龙兴武, 汪之国. 四频差动激光陀螺最佳工作点实时控制技术[J]. 光学学报, 2012, 32(11): 1123001. Wang Fei, Long Xingwu, Wang Zhiguo. Real-Time Control Technique of Optimal Operating Point in Four-Mode Differential Laser Gyro[J]. Acta Optica Sinica, 2012, 32(11): 1123001.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!