光学 精密工程, 2012, 20 (8): 1696, 网络出版: 2012-09-04   

高精度紫外标准探测器的定标

Calibration of high accuracy UV standard detector
王锐 1,2,*王淑荣 2郭劲 1,2王挺峰 1,2
作者单位
1 中国科学院 长春光学精密机械与物理研究所 激光与物质相互作用国家重点实验室,吉林 长春 130033
2 中国科学院 长春光学精密机械与物理研究所,吉林 长春 130033
摘要
研究了紫外标准探测器定标方法,以便进一步提高紫外波段辐射定标的精度。构建了高精度紫外标准辐射计,并推导了紫外辐射计响应度标准。在定标过程中直接利用高精度标准辐射计进行标准传递,并根据替代法定标原理消除了多项影响因子,使得定标精度大幅提高。最后,利用标准光源及标准探测器定标方法对待测光源辐照度、空间遥感仪器辐照度响应度进行了标定。两种方法定标结果表明:采用标准探测器定标方法可使定标不确定度降低到1.6%,充分证明了紫外标准探测器定标方法的有效性及高精度,实现了紫外探测器定标方法的工程化应用。
Abstract
A UV standard detector calibration method was researched to improve the calibration accuracy. A High Accurate UV Radiometer (HAUVR) was established, and the standard response of the UV radiometer was deduced. In calibration, the HAUVR was used to transfer standard and the substitution method was adopted to eliminate some uncertainty factors. Finally, two kinds of calibration methods, namely, standard light source and standard detector calibration methods, were taken to calibrate the irradiance of an untested light and the irradiance response of an ozone vertical detector. Calibration results show that the uncertainty of calibration has been decreased to 1.6% by standard detector calibration method, which proves the efficiency and high accuracy of the UV standard detector calibration method. It realizes the engineering applications of the UV detector calibration method.

王锐, 王淑荣, 郭劲, 王挺峰. 高精度紫外标准探测器的定标[J]. 光学 精密工程, 2012, 20(8): 1696. WANG Rui, WANG Shu-rong, GUO Jin, WANG Ting-feng. Calibration of high accuracy UV standard detector[J]. Optics and Precision Engineering, 2012, 20(8): 1696.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!