中国激光, 2012, 39 (11): 1102007, 网络出版: 2012-10-25   

1.3 μm高脉冲能量锁模皮秒再生放大器 下载: 518次

1.3 μm Picosecond Regenerative Amplifier with High Pulse Energy
作者单位
1 北京国科世纪激光技术有限公司, 北京 100192
2 中国科学院光电研究院, 北京 100080
3 EKSPLA, 维尔纽斯, 立陶宛
摘要
报道了激光二极管抽运工作波长为1.3 μm的高能量皮秒再生放大器,种子源为重复频率65 MHz、平均输出功率140 mW的被动锁模皮秒激光振荡器。通过优化再生放大器,获得了重复频率为1 kHz、脉宽小于20 ps、单脉冲能量大于1 mJ的高脉冲能量皮秒脉冲激光,脉冲能量稳定性均方根值小于0.3%,其倍频光束671 nm的质量因子M2小于等于1.1,这表明再生放大器输出激光具有很好的光束质量。
Abstract
A laser diode pumped 1.3 μm high energy picosecond regenerative amplifier is reported. The passively mode-locked oscillator as a seed source provides repetition rate of 65 MHz and power of 140 mW. An effective regenerative amplifier is designed. The regenerative amplifier is operated at 1 kHz and its pulse duration is shorter than 20 ps. Its output pulse energy is 1 mJ. Its pulse stability root mean square is less than 0.3%. The beam quality factor M2 is less than or equal to 1.1 after second harmonic generation to 671 nm, which shows its good beam profile.

王璐璐, 牛岗, 石朝辉, 闫莹, 麻云凤, 黄玉涛, 樊仲维, , , . 1.3 μm高脉冲能量锁模皮秒再生放大器[J]. 中国激光, 2012, 39(11): 1102007. Wang Lulu, Niu Gang, Shi Zhaohui, Yan Ying, Ma Yunfeng, Huang Yutao, Fan Zhongwei, Mikhail Grishin, Donatas Joksas, Zenonas Kuprionis. 1.3 μm Picosecond Regenerative Amplifier with High Pulse Energy[J]. Chinese Journal of Lasers, 2012, 39(11): 1102007.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!