半导体光电, 2012, 33 (5): 752, 网络出版: 2012-11-01   

基于CCD的空间目标光度测量方法研究

Research on Photometric Measurement of Space Targets Using CCD
作者单位
成都信息工程学院 计算机学院, 成都 610225
摘要
空间目标的光度特性能够反映其在轨的运动状态和姿态, 通过对空间目标光度的测量, 可以确定其状态和姿态。首先分析了传统光度计光度测量方法, 然后给出了用CCD进行光度测量的方法, 该方法通过测量多颗星等已知恒星的灰度值, 通过光度的定义公式推导出“0”等星的灰度值。进行光度测量时, 得到待测星的灰度值之后再与“0”星等灰度值比较, 计算出待测星的星等。在计算“0”星等灰度值与反算待测星星等时充分考虑了大气消光对测量结果的影响, 并按照消光公式对测量结果进行了修正。试验结果表明, 基于CCD的光度测量方法精度优于0.2星等。
Abstract
The photometric characteristics of the space target can reflect its motion state in the orbit and attitude, and by measuring the photometric, its state and stance can be determined. Traditional photometer photometric measurements are analyzed, and then a photometric measurement method based on CCD is proposed. In this method, the stars gray value of known magnitude is measured, and then the gray value of "0" magnitude is obtained by the definition of formula of photometry. By photometric measurements, the gray value of the test star is compared with that of "0" magnitude, then the magnitude of the test star is calculated. When calculating "0" magnitude gray-scale and inverse calculating the magnitude of the test star, it is taken full account of the atmospheric extinction on the measurement results, and the measurement results are corrected in accordance with the formula for extinction. Test results show that the accuracy error of CCD photometry method is less than 0.2 magnitude.

魏敏, 魏维. 基于CCD的空间目标光度测量方法研究[J]. 半导体光电, 2012, 33(5): 752. WEI Min, WEI Wei. Research on Photometric Measurement of Space Targets Using CCD[J]. Semiconductor Optoelectronics, 2012, 33(5): 752.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!