激光技术, 2012, 36 (6): 735, 网络出版: 2012-11-07   

激光光幕靶坐标测量系统的设计和实现

Design and realization of a laser screen coordinate measurement system
作者单位
中北大学 信息与通信工程学院 电子测试技术国家重点实验室,太原 030051
摘要
为了测量大靶面立靶坐标, 提出了一种激光光幕靶的坐标测量方法, 该方法采用4个90°扇形激光器作为发射光源, 高灵敏度的光电二极管阵列作为接收装置。4个激光器发出的光相互交叉形成一个矩形激光光幕, 当子弹穿过激光光幕时, 会分别在x方向和y方向挡住一部分激光, 促使相应的光电二极管产生信号; 经过信号的采集和分析得到弹着点坐标, 最后经过实弹试验得到子弹的坐标。结果表明, 该立靶系统具有高精度和高灵敏度的特点。
Abstract
In order to measure the vertical target coordinates of the large target surface, a coordinate measurement method with laser screen target was presented with four 90° fan-shaped lasers as light sources, and a high-sensitivity photodiode array as the receiver. When bullets fly through the rectangular laser screen, formed by the intersected light from the four lasers, they will block part of the laser in the x and y directions respectively, and thus corresponding signal produces from the photodiodes. The impact coordinates can be obtained by acquiring and processing the signal. Finally the coordinates of the bullet were tested in active experiments. The results show that this vertical target system has the characteristics of high precision and high sensitivity.

邱婉静, 姜三平, 郝晓剑. 激光光幕靶坐标测量系统的设计和实现[J]. 激光技术, 2012, 36(6): 735. QIU Wan-jing, JIANG San-ping, HAO Xiao-jian. Design and realization of a laser screen coordinate measurement system[J]. Laser Technology, 2012, 36(6): 735.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!